Self-perception of need to replace dentures and oral health-related quality of life: cross-sectional study nested in a Cohort in Southern Brazil

Aim: With the significant increase in life expectancy over the last decades, it is important to understand how oral health can impact the oral health-related quality of life of older adults. This study aimed to investigate the association between need to replace dentures and oral health-related quality of life (OHRQoL) among older adults belonging to a Cohort in southern Brazil. Methods: This cross-sectional study was conducted with data from the 2019 Pelotas Elderly Cohort. The OHRQoL was assessed using the GOHAI. Need to replace dentures was self-report using a question dichotomized into yes/no. In the statistical analysis, unadjusted and adjusted models estimate from linear regression models were calculated. The significance level adopted was 5%. Results: A total of 493 older adults were included. On the GOHAI questionnaire, the mean score was 32.74 (SD±0.16). Individuals considering need of prosthesis replacement were 47.89%. Report of need to replace dentures was associated to lowest mean on the GOHAI score (ß -1.14; 95%CI - 1.80; -0.478, and on the physical (ß -0.56; 95%CI - 0.94 -0.17) and psychosocial (ß -0.48; 95%CI - 0.74; -0.22) dimensions. Conclusion: Our findings highlight the importance of also considering subjective measures of oral health in the dental care of older adults, since reporting the need for denture replacement, regardless of the reason, was associated with a worse oral health-related quality of life, including physical and psychosocial aspects

Uso de prótesis parcial removible con resina acrílica termoplástica: una revisión de literatura

La prótesis parcial removible (PPR) es una alternativa de tratamiento en pacientes que perdieron algunos elementos dentarios, debido al costo relativamente bajo y a la generación de una función masticatoria satisfactoria. Además, es una buena opción cuando hay pérdida de los tejidos óseos, dado que impide la instalación de implantes dentarios. La PPR convencional presenta una estructura metálica que ofrece retención y resistencia a la prótesis, convirtiéndola en poco agradable a los pacientes, por el hecho de dejar a la vista el metal en la cavidad oral. A partir de investigadores que decidieron ir más allá del simple estudio de la función y la estética de las PPR para adentrase en sus diversas formas de presentación, surgió la prótesis parcial flexible (PFlex). La PFlex es una prótesis parcial confeccionada con resina termoplástica, sin metal y con flexibilidad. Si bien, muchos profesionales la emplean como prótesis temporal, otros tantos la han usado como alternativa a la PPR convencional. Así, uno de los frecuentes interrogantes de los clínicos es si realmente es posible utilizar la PFlex como alternativa protética definitiva. Por tanto, el propósito de este trabajo fue realizar una revisión de la literatura para evaluar si el uso de prótesis parciales removibles con resina termoplástica puede ser una alternativa a las prótesis parciales convencionales, exponiendo las ventajas, desventajas, indicaciones, contraindicaciones y las propiedades del material protético.

Removable partial denture (RPP) is an alternative treatment when it comes to patients who have lost some dental elements, as they have the advantages of a relatively low cost and a satisfactory masticatory function. Furthermore, it is a good option when there is bone tissue loss, making dental implants placement unfeasible. Conventional PPR has a metallic frame that provides retention and resistance to the prosthesis, which makes it unpalatable to patients because it leaves the metal in the oral cavity evident. Many researchers, aiming to give back beyond function and aesthetics, are studying forms of presentation of PPR, thus emerging the flexible partial prosthesis (PFlex). PFlex is a partial denture made with thermoplastic, resin metal-free and with flexibility, however its use, for many professionals, is limited only as temporary prostheses, but there are some clinicians who use PFlex as an alternative to conventional PPR. Thus, one of the questions constantly asked by scientists is whether it is possible to use PFlex as a definitive prosthetic alternative. Therefore, the aim of this study was to conduct a literature review to assess whether the use of removable partial dentures with thermoplastic resin can be an alternative to conventional partial dentures, exposing the advantages, disadvantages, indications, contraindications, and the properties of the prosthetic material.

A Study of Post Insertion Problems in Removable Partial Dentures in Kashmiri Population – A Survey Based Research

The aim of this study is to collect data of various post insertion problems in removable partial dentures which were examined in the department of prosthodontics in government dental college srinagar. Around 200 patients were included in the study . The various problems that could be found in removable partial dentures include pain, discomfort, inflammatory conditions, problems in speech, loose dentures, occlusal problems, difficulty in deglutition, residual ridge resorption and altered taste perception.

Relation between the risk factors for the severity of denture stomatitis and quality of life of complete edentulous individuals: a cross-sectional study

Abstract Objective To assess the association between risk factors for developing denture stomatitis (DS) and oral health-related quality of life (OHRQoL) in complete denture wearers. Methodology Participants of both sexes, wearing complete dentures, were classified using the modified Newton classification for the absence or the severity of DS and allocated to groups Normal or zero, IA, IB, II, and III. Lifestyle, oral and denture history, and medication use were assessed using specific questionnaires; clinical parameters such as anatomical characteristics of support were evaluated with the Kapur classification; salivary flow (SF) was calculated by the volume of unstimulated saliva per minute; and microbial load was determined by counting colony forming units (CFU) of target microorganisms present in the biofilm collected from dentures and palate. OHIP-EDENT assessed the OHRQoL. Kendall's tau_b and Spearman tests were applied with a significance level of 5%. Results 184 patients (143 female and 41 male) aged 65.5 ± 6.8 years were evaluated. Positive correlations were found for sex (women; p=0.013, r=0.16), individuals who started to consume alcoholic beverages as a young adult (18-27 years) (p=0.008, r=0.22), CFU of Candida spp. (p<0.001, r=0.27 denture; p<0.001, r=0.31 palate); Candida albicans (p=0.004, r=0.22 denture; p=0.003, r=0.25 palate), and Candida glabrata (p=0.004, r=0.22 denture; p=0.001, r=0.27 palate). Moreover, negative correlations with DS were found for CFU of Staphylococcus spp. (p=0.004, r=-0.20 palate) and enterobacteria (p=0.002, r=-0.24 palate), as well as a negative correlation between SF (p=0.009, r=-0.193) and DS. The CFU of Staphylococcus spp. and enterobacteria on the palate significantly correlated with OHRQoL. Conclusion Being female, consuming alcoholic beverages as a young adult, CFU of Candida spp., Candida albicans, Candida glabrata, and salivary flow may be the most significant risk factors for DS. The microbial load of Staphylococcus spp. and enterobacteria seems to influence the quality of life for complete denture wearers.

Cigarette Smoking Effect on Microhardness and Flexural Properties of Denture Base Resins

ABSTRACT Objective: To identify the tobacco effect on flexural properties and the microhardness of three acrylic resins. Material and Methods: Three resins were tested: two thermo-polymerizable acrylic resins (RMB 20 and BMS 014) and one autopolymerized acrylic resin. The 3-point bending and microhardness tests were carried out with a universal tensile-compression machine and a micro-Vickers hardness tester. The acrylic resin specimens have been exposed for 21 days to cigarette smoke in a smoking room. Their mechanical strength was compared to unexposed samples. Statistical analysis was performed using the data processing software SPSS Statistics 21.0. Results: The flexural properties of the resins were affected by cigarette smoke only in the case of Major Base 20® (drop in strength with p= 0.02; 0.6; 0.7 and in elastic modulus with p= 0.86; 0.74 and 0.85 for Major Base 20®, BMS 014® and Major Repair®). The cigarette smoke affected significantly microhardness for all groups (p<0.001). Conclusion: Cigarette smoking does not affect the flexural properties of the acrylic resin (BMS 014® and Major Repair® unlike Major Base 20®), but it does reduce the microhardness.

Audit to assess the quality of 916 prosthetic prescriptions of removable partial dentures / 华西口腔医学杂志

OBJECTIVES@#The objectives of this study were to assess the quality of prosthetic prescriptions of removable partial dentures (RPDs) and to analyze the current situation of the communication and information delivery between clinicians and technicians.@*METHODS@#All RPD prosthetic prescriptions received by a major dental laboratory in 4 weeks were involved in a quality audit, and the prescriptions were divided into three groups in accordance with the grades of clients. The filling of prosthetic prescriptions was recorded. The items in the prescriptions for audit included the general information of the patient, the general information of the clinician, the design diagram information, other detailed information, and the return date. The prescriptions were categorized into four levels on the basis of their quality by two quality inspectors who have been working for more than 10 years.@*RESULTS@#A total of 916 prescriptions were collected and assessed. The names in the general information of the patient and the clinician were filled out best, both at the rate of 97.6% (n=894). The return date was filled out worst, only at the rate of 6.4% (n=59). Of those prescriptions, 86.8% (n=795) exhibited inadequate design diagram information. The results of the quality assessment demonstrated that 74.2% of prescriptions were assessed as noncompliant ones and failed to meet the acceptable clinical quality standard.@*CONCLUSIONS@#At present, the overall quality of RPD prosthetic prescriptions is poor. The responsibilities of clinicians and technicians are unclear, and the communication between them is not ideal.

A clinical application study of digital manufacturing simple intraoral Gothic arch-tracing device in determining the centric relation of complete dentures / 北京大学学报(医学版)

OBJECTIVE@#To verify the consistency between the digital manufacturing simple intraoral Gothic arch-tracing device and the traditional intraoral Gothic arch-tracing device in determining the centric relation of complete dentures restoration.@*METHODS@#Ten outpatients with edentulous jaws were selec-ted, and the centric relation of the patients was determined by digital manufacturing of simple intraoral Gothic arch-tracing device (T1) and traditional intraoral Gothic arch-tracing device (T2); the difference of clinical operation time between the two methods was recorded; the upper and lower edentulous jaw plaster models were scanned with two kinds of centric relation, the Standard Triangle Language (STL) files imported into Geomagic studio software to apply the best fitting of multiple points of the both upper jaw models, the fitted STL files imported into the 3 shape viewer software, and the maximum position deviations of the vertical, labial (buccal) and lingual directions of the mandibular midline area and molar areas in T1 and T2 groups measured. During the clinical complete dentures try-in, we observed whether there was midline deviation in the mouth of T1 group and T2 group, and whether the occlusion of posterior teeth was stable or not.@*RESULTS@#The mean time spent on determining the centric relation of T1 and T2 groups was (41.90±2.64) min, (57.50±2.37) min respectively. Paired t test was conducted in the two groups, P < 0.01 with significant statistical difference; The mean maximum position deviation between T1 group and T2 group of the midline mandibular region in labial lingual direction was (0.32±0.14) mm, that was (0.40±0.23) mm in vertical direction; the mean maximum position deviation of molar area in buccal lingual direction was (0.35±0.23) mm and that was (0.33±0.20) mm in vertical direction. In the vertical and horizontal directions, the maximum position deviation of mandibles between group T1 and group T2 was controlled within 0.5 mm. In the process of clinical complete dentures try-in, there was no deviation from the center line of dentures. There was not warping, swinging and other poor stability phenomena in T1 and T2 groups.@*CONCLUSION@#The digital manufacturing of simple intraoral Gothic arch-tracing device can be used to determine the centric relation of complete dentures, which can not only save time of clinical operation, but also ensure the accuracy of the centric relation.

Oral health-related quality of life of older adults living in long-term care facilities and its association with dental prosthesis use and condition / Qualidade de vida relacionada à saúde bucal de idosos residentes em instituições de longa permanência: associação com o uso e condição da prótese

OBJECTIVE: This cross-sectional study aimed to evaluate the association of oral health-related quality of life with prosthetic rehabilitation status and dental prosthesis condition in residents of Brazilian long-term care facilities. METHODS: The oral health-related quality of life of older adults (n = 194; mean [standard deviation] age = 78.93 [9.10]) was assessed by the Geriatric Oral Health Assessment Index and the Oral Health Impact Profile questionnaires. Prosthetic rehabilitation status was recorded according to the absence of teeth and use of dental prostheses. Dental prosthesis condition was considered good or poor based on stability, retention, occlusion, vertical dimension, and defects. Poisson regression models were plotted to analyze the data (α = 0.05). RESULTS: Lower Geriatric Oral Health Assessment Index scores were associated with edentulism with denture use only on one jaw (B = -0.05) and poor dental prosthesis stability (B = -0.04). Similarly, edentulous participants with denture only on one jaw (B = 0.59) and those wearing dental prostheses with poor stability (B = 0.36) are more likely to achieve higher Oral Health Impact Profile scores. Also, lower Oral Health Impact Profile scores were associated with denture defects (B = -0.34). CONCLUSION: In summary, the oral health-related quality of life of older adults living in long-term care facilities is negatively impacted by edentulism with denture only on one jaw and use of dental prostheses with poor stability. Therefore, long-term care facilities should provide oral health training to caregivers, include dental professionals in the staff, and articulate demands with oral health teams in the primary care system. (AU)

OBJETIVO: Este estudo transversal objetivou avaliar a associação da qualidade de vida relacionada à saúde bucal com o status de reabilitação protética e a condição da prótese em residentes de instituições de longa permanência no Brasil. METODOLOGIA: A qualidade de vida relacionada à saúde bucal dos idosos (n = 194; média [desvio padrão] idade = 78,93 [9,10]) foi avaliada pelos questionários Geriatric Oral Health Assessment Index e Oral Health Impact Profile. O status de reabilitação protética foi registrado de acordo com a ausência de dentes e uso de próteses dentárias. A condição da prótese foi considerada boa ou ruim com base na estabilidade, retenção, oclusão, dimensão vertical e defeitos. Modelos de regressão de Poisson foram plotados para analisar os dados (α = 0,05). RESULTADOS: Como resultado, menores escores no Geriatric Oral Health Assessment Index foram associados ao edentulismo com o uso de dentadura em apenas uma arcada (B = -0,05) e ao uso de próteses com estabilidade ruim (B = -0,04). De forma similar, participantes edêntulos que usavam dentadura em apenas uma arcada (B = 0,59) e aqueles que portavam prótese com estabilidade ruim (B = 0,36) são mais propensos a ter maiores escores no Oral Health Impact Profile. Além disso, menores escores no Oral Health Impact Profile foram associados a defeitos na prótese (B = -0,34). CONCLUSÃO: Sumarizando, a qualidade de vida relacionada à saúde bucal de idosos residentes em instituições de longa permanência é negativamente impactada pelo edentulismo com o uso de dentadura em apenas uma arcada e uso de prótese com estabilidade ruim. Assim, instituições de longa permanência devem promover capacitação em saúde bucal aos cuidadores, incluir dentistas no quadro de funcionários e articular com as equipes de saúde bucal da Atenção Primária à Saúde. (AU)

Preparation of ICD and overdenture in patients with Cushing's Syndrome: five-year follow-up / Preparo de PTI e overdenture em pacientes com Síndrome de Cushing: cinco anos de acompanhamento

The aim of this study is to report a clinical case of a patient with Cushing's syndrome, low self-esteem and need for oral rehabilitation. A 50-year-old female patient with hypercortisolism sought care at School of Dentistry of the Federal University of Minas Gerais. During anamnesis, the patient reported painful symptoms and mobility of the upper and lower teeth. On clinical examination, absence of many teeth were observed, periodontal disease and caries lesions. After discussion of the case, the planning involved the extraction of all teeth, and the preparation of Maxillary Immediate Complete Dentures (ICD's) and Immediate Mandibular Implant-retained Overdenture (IMIO). The treatment proposed allowed the restored aesthetics, phonetics and chewing(AU)

O objetivo desse estudo é relatar um caso clínico de uma paciente com síndrome de Cushing, baixa autoestima e necessidade de reabilitação oral. Paciente do sexo feminino, 50 anos de idade e com hipercortisolismo, procurou atendimento na Faculdade de Odontologia da Universidade Federal de Minas Gerais. Durante a anamnese, a paciente relatou sintomas dolorosos e mobilidade dos dentes superiores e inferiores. No exame clínico, foi observada a ausência de muitos dentes, doença periodontal e lesões cariosas. Após a discussão do caso, o planejamento envolveu a extração de todos os dentes, e o preparo de Prótese Total Imediata maxilar (PTI), e Overdenture Implantorretida Imediata mandibular. O tratamento proposto permitiu que restaurasse a estética, fonética e mastigação(AU)

Tecnologia digital em próteses totais: propriedades dos materiais CAD-CAM e desenvolvimento de uma patente de inovação para simplificação do fluxo de trabalho / Digital technology in complete dentures: properties of CAD-CAM materials and development of an innovation patent to simplify the workflow

Recursos digitais, como a manufatura subtrativa (fresagem CAD-CAM) e a manufatura aditiva (impressão 3D) podem promover significativos avanços, reduzindo o tempo e o custo de produção de próteses totais (PTs). Assim, este estudo objetiva investigar as características superficiais (rugosidade e ângulo de contato), propriedades mecânicas (resistência mini-flexural) e a adesão de biofilme sobre polímeros de PMMA pré-polimerizado para fresagem CAD-CAM e sobre resinas para impressão 3D utilizados na fabricação de bases de PTs, bem como propor um fluxo de trabalho inovador para abreviar e simplificar as etapas de confecção de PTs. Para a análise in vitro, foram fabricados um total de 60 discos e 40 barras distribuídas igualmente em quatro grupos: fresagem CAD-CAM (GF), impressão 3D (GI) e PMMA convencional termopolimerizado por ciclo longo (GCL) ou por energia de micro-ondas (GCM). A rugosidade foi determinada pelo valor de Ra; o ângulo de contato foi medido pelo método da gota séssil; o teste de resistência à mini-flexão foi obtido por teste de flexão de três pontos, enquanto o comportamento frente à formação de biofilme foi analisado através da adesão de biofilme de C. albicans. Os dados foram analisados por meio de estatística descritiva e analítica (α = 0,05). Os resultados mostraram que o GI apresentou a maior rugosidade superficial (Ra: 0,317 ± 0,151µm) e os menores valores de resistência à miniflexão (57,23 ± 9,07MPa) e o GF apresentou a menor adesão de biofilme de C. albicans (log UFC/mL: 3,74 ± 0,57) e maior média de resistência à mini-flexão (114,96 ± 16,23 MPa). Não houve diferença estatística entre o GF e os grupos convencionais para rugosidade, ângulo de contato e resistência à mini-flexão. A patente de inovação desenvolvida estabeleceu um novo fluxo de trabalho para confecção de próteses totais através de um protocolo de três consultas em que foram feitas as moldagens anatômicas na 1ª sessão, juntamente com o registro do suporte labial, plano oclusal e linhas de referência para subsidiar a montagem dos dentes superiores. Uma prótese-teste foi confeccionada por meio de procedimentos convencionais ou CAD-CAM e avaliada na 2ª consulta, permitindo observar o resultado estético, executar a moldagem funcional e realizar o registro da relação maxilo-mandibular, fornecendo referências precisas para a confecção da prótese inferior. Com base nos resultados da fase in vitro deste estudo, os corpos-de-prova obtidos a partir de disco para fresagem CAD-CAM apresentaram resistência flexural e propriedades superficiais semelhantes às resinas convencionais e mostraram um comportamento inibidor da adesão de C. albicans, enquanto os espécimes produzidos por impressão 3D exibiram a menor resistência à flexão e a maior rugosidade da superfície. O dispositivo inovador apresentado para a execução das etapas clínicas relacionadas à fabricação de PTs mostrou-se efetivo para abreviar e simplificar as técnicas disponíveis, apresentando confiabilidade e previsibilidade para produção de PTs em número de sessões reduzido (AU).

Digital features like subtractive and additive manufacturing can promote breakthroughs by reducing the time and cost of making complete dentures (CDs). Thus, this study aims to investigate surface characteristics (roughness and contact angle), mechanical properties (mini-flexural strength), and biofilm adhesion on computer-aided design/computer-aided manufacturing (CAD-CAM) PMMA polymer, and threedimensional (3D) printed resin for denture´s base fabrication as well as to propose an innovative workflow. For in vitro analysis, a total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM pre-polymerized PMMA disc (GF), one 3D-printed (GI), and two conventional heat-polymerized (GCL and GCM) materials for denture base fabrication. Roughness was determined by the Ra value; the contact angle was measured by the sessile drop method; the mini-flexural strength test was a three-point bending test while the biofilm formation inhibition behavior was analyzed through C. albicans adhesion. The data were analyzed using descriptive and analytical statistics (α = 0.05). Results showed that GI specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 µm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa) and the GF showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). There was no statistical difference between GF and conventional groups for roughness, contact angle, and mini-flexural strength. In turn, the presented novel workflow for complete dentures fabrication reached a three appointments protocol in which preliminary impressions were made in the 1st session, all together to maxillary registration of lip support, occlusal plane, and reference lines for teeth arrangement. A trial denture was manufactured and evaluated by the 2nd appointment through conventional or CAD-CAM procedures, allowing esthetics evaluation, final impression, and maxillomandibular relationship record and providing precise references for final dentures fabrication. Based on the findings of this in vitro study, GF presented surface and mechanical properties similar to conventional resins and show improved behavior preventing C. albicans adhesion, while GI specimens exhibited the lowest flexural strength, and highest surface roughness. The proposed device for CD´s fabrication clinical procedures reached feasibility and by simplifying available techniques, this protocol could achieve reliability and predictability to produce complete dentures with reduced working time (AU).

Intervención educativa para mejorar la salud bucal de pacientes portadores de prótesis estomatológicas parciales / Educational intervention to improve the patient's oral health with partial dentures

RESUMEN Fundamento: Las prótesis estomatológicas son una solución estética y funcional a la pérdida de los dientes y contribuyen a la calidad de vida de aquellos que la portan, pero el sistema estomatognático se expone a lesiones cuando no se cumplen las orientaciones para su uso, cuidado e higiene. Objetivo: Evaluar la efectividad del programa educativo para mejorar la salud bucal en pacientes portadores de prótesis estomatológicas parciales. Metodología: Se realizó un estudio preexperimento con medición antes y después de la intervención comunitaria sin grupo de control, en el período de septiembre 2019 a febrero del 2020. Se seleccionaron 50 pacientes mayores de 19 años portadores de prótesis estomatológica parcial, que cumplieron criterios de inclusión. Se utilizó la encuesta, la observación, el criterio de especialistas y el experimento como métodos del nivel empírico y estadístico-matemático para medir las variables: nivel de conocimiento, eficiencia del cepillado bucodental e higiene de las prótesis estomatológicas. Resultados: Al culminar la aplicación del programa educativo se observó un cambio de 6 % a un 52 % del nivel de conocimiento bueno sobre el uso y cuidado de las aparatologías protésica, en la eficiencia del cepillado de un 30 % a un 82 % y de un 8 % a un 68 % de buena higiene en las prótesis. Conclusiones: El programa educativo se evaluó de efectivo al obtener resultados satisfactorios en cuanto a la modificación de los conocimientos y prácticas sobre salud bucal en los pacientes portadores de prótesis estomatológicas.

ABSTRACT Background: Dentures are an esthetic and functional solution to tooth loss and contribute to life quality of those who wear them, but the stomatognathic system is exposed to lesions when guidelines for their use, care and hygiene are not followed. Objective: To assess the effectiveness of an educational program to improve oral health in patients with partial dentures. Methodology: A measurement pre-experiment study was conducted before and after community intervention without any control group, from September 2019 to February 2020. 50 patients over 19 years of age wearing partial denture who met the inclusion criteria were selected. Survey, observation, specialist criteria and experiment were used as empirical and statistical-mathematical methods to measure variables: knowledge level, oral brushing efficiency and dentures hygiene. Results: At the end of the application of the educational program, a change was observed from 6 % to 52 % in the good knowledge level on wear and care of prosthetic appliances, in brushing efficiency from 30 % to 82 % and from 8 % to 68 % in prostheses good hygiene. Conclusions: The educational program was assessed as effective in obtaining satisfactory results in terms of modification of oral health knowledge and practices in patients with dentures.

Potential role of dental pulp stem cells conditioned medium for odontoblastic differentiation

BACKGROUND: Functional bioengineered tooth regeneration using autologous or allogeneic alternative differentiated cells sources are thought to have a great potential in replacing conventional dentures. This study investigated the potential of dental pulp stem cells (DPSCs) conditioned medium for odontoblastic differentiation of Wharton's jelly mesenchymal stem cells (WJMSCs). The DPSCs derived from healthy adult permanent first molars were cultured at high confluence prior to conditioned medium collection. The WJMSCs were cultured in six different treatments, with varying ratios of culture media to DPSCs-conditioned medium. MTT assay was used to measure the rate of proliferation of WJMSCs, while immunocytochemistry staining was utilised to detect the expression of dental matrix protein 1 (DMP-1). The deposited calcium was detected and analysed via Alizarin-Red Staining (ARS). RESULTS: It was found that the proliferation of WJMSCs cultured under the mixture of complete medium and DPSCs conditioned medium showed significantly lower than the control; presumably the cells started to exit proliferative state prior differentiation. In 14 days of induction, the cells in all treatments showed osteoblastic-like morphology, calcium compound deposits were observed at day 7, 10 and 14 of differentiation suggested that DPSCs conditioned medium could lead to osteoblastic/odontoblastic differentiation. However, the DMP-1 protein can be seen only expressed minimally at day 14 of conditioned medium induction. CONCLUSIONS: In conclusion, DPSCs conditioned medium appeared as a potential odontoblastic induction approach for WJMSCs. To further investigate the stimulatory effects by DPSCs conditioned medium, specific signalling pathway need to be elucidated to enhance the differentiation efficiency.

Prosthetic complications and quality of life among wearers of mandibular overdenture with the Facility-Equator system

Abstract This longitudinal study aimed to assess the performance of the Facility-Equator system as mandibular overdenture (MO) retainers from a prosthetic perspective during 2 years of loading and to investigate the oral health-related quality of life (OHRQoL) and whether prosthetic events can affect the OHRQoL. Twenty-four patients (68.1 ± 7.51 years) reported their OHRQoL through the Geriatric Oral Health Assessment Index (GOHAI) and Oral Health Impact Profile (OHIP-EDENT) questionnaires before MO loading and after 1 and 2 years of usage. Prosthetic occurrences were recorded during this period. Data were analyzed using the Wilcoxon test, Mann-Whitney test, and Spearman correlation coefficients. Of the 127 prosthetic events that occurred in the first year, the most frequent events were prosthesis adjustments (16.5%), dislodgement of the Equator attachment (14.17%), and O-ring replacement (11.8%). Eighty-seven prosthetic events were recorded in the second year, the most frequent events being prosthesis adjustments (27.6%), O-ring replacement (20.7%), and recapturing the female matrix (11.5%). All domains of the GOHAI and OHIP-EDENT questionnaires exhibited a significant difference (p < 0.05) between the baseline and 1- and 2-year evaluations, except in the Social Disability and Psychological Discomfort domains (p > 0.05) of OHIP-EDENT after 1 year. Complications related to prosthetic maintenance, such as fracturing of the prosthesis, Equator dislodgement, prosthesis rebasing, and new overdenture confection, affect the OHRQoL (p < 0.05), primarily the Physical Pain and Discomfort domains, especially in the first year of MO loading.

Randomized clinical trial of complete denture cleaning methods in residents of care institutions

Aim: To evaluate the efficacy of ultrasonic bath and traditional brushing in the hygiene of complete dentures of dependent residents in long-term care institutions (LTCIs). Methods: A randomized cross-over clinical study was conducted in 17 maxillary complete denture wearers living in LTCIs. Cleaning protocols were brushing or ultrasonic bath, both applied with neutral liquid soap. Biofilm biomass were estimated by MTT reduction assay and specific microbial load (CFU) of Streptococcus spp., Staphylococcus spp. and Candida spp. were quantified by selective and differential culture media. Results: Ultrasound method showed higher percentage reduction of biofilm biomass and specific microbial loads of Streptococcus spp. compared to brushing (p<0.01). Reduction of microbial loads of the other microorganisms were not different between cleaning methods (p>0.05). Conclusions: The ultrasonic bath proved to be a feasible alternative method for the mechanical cleaning of complete dentures in LTCIs

Fatores associados ao não uso da prótese total inferior e seu impacto em idosos brasileiros / Factors associated with not using the lower denture and its impact on elderly Brazilians / Factores asociados con la no utilización de la dentadura postiza inferior y su impacto en los ancianos brasiliños

Introdução:Grande parte dos idosos caracteriza a reabilitação com prótese total como satisfatória. Entretanto, algunsse mostram insatisfeitos devido a dificuldades com a adaptação, principalmente em relação a prótese total mandibular. Objetivo:Identificar a prevalência e os fatores associados ao não uso da prótese total inferior em idosos. Ademais, verificou-se o impacto do não uso dessa prótese na autopercepção de saúde bucal e na dificuldade de se alimentar. Método:Trata-se de um estudo de base populacional e transversal. Para a sua realização, foi utilizado a base de dados da última Pesquisa Nacional de Saúde realizada no Brasil. Inicialmente, o teste Qui-quadrado foi usado para a análise dos dados. Em seguida, uma análise multivariada do tipo regressão múltipla de Poisson foi realizada para o ajuste das razões de prevalência. Resultados:Participaram 4.582 idosos brasileiros, dos quais 27,1% não faziam uso da prótese total inferior. Onão uso da prótese esteve associada aos idosos mais velhos (p=0,001), aos sem instrução (p=0,001), aos que não possuem plano de saúde (p=0,019), aos que fumam (p=0,012) e aos que não realizavam higiene bucal todos os dias (p<0,001). O não uso da prótese total inferior impactou em uma pior autopercepção de saúde bucal (p=0,001) e em maiores dificuldades de se alimentar (p<0,001). Conclusões:Onão uso de prótese total inferior está associado a piores condições socioeconômicas e a um pior estilo de vida, fortemente ligado ao ato de fumar. Ademais, o não uso da prótese impacta negativamente na autopercepção de saúde bucal e na alimentação (AU).

Introduction:A large part of the elderly characterizes rehabilitation with total prosthesis as satisfactory. However, some are dissatisfied due to difficulties with adaptation, mainly in relation to total mandibular prosthesis.Objective:To identify the prevalence and factors associated with not using the lower denture in the elderly. In addition, the impact of not using this prosthesis on self-perceived oral health and the difficulty of eating was verified.Methods:This is a population-based and cross-sectional study. For its realization, the database of the last National Health Survey carried out in Brazil was used. Initially, the Chi-square test was used for data analysis. Then, a multivariate analysis using Poisson multiple regression was performed to adjust the prevalence ratios.Results:4,582 elderly Brazilians participated, of which 27.1% did not use the lower total prosthesis. Failure to use the prosthesis was associated with older elderly people (p=0.001), those without education (p=0.001), those who do not have health insurance (p=0.019), those who smoke (p=0.012) and those who they did not perform oral hygiene every day (p<0.001). Failure to use the lower denture impacted worse self-perceived oral health (p=0.001) and greater difficulties in eating (p<0.001). Conclusions:Failure to use a lower denture is associated with worse socioeconomic conditions and a worse lifestyle, strongly linked to smoking. In addition, the non-use of the prosthesis has a negative impact on self-perception of oral health and food (AU).

Introducción:Una gran parte de los ancianos caracteriza la rehabilitación con prótesis total como satisfactoria. Sin embargo, algunos están insatisfechos por dificultades de adaptación, principalmente en relación con la prótesis total mandibular.Objetivo:Identificar la prevalencia y los factoresasociados a la no utilización de la prótesis inferior en el anciano. Además, se verificó el impacto de no utilizar esta prótesis sobre la salud bucal autopercibida y la dificultad para comer. Método:Se trata de un estudio poblacional y transversal. Para su realización se utilizó la base de datos de la última Encuesta Nacional de Salud realizada en Brasil. Inicialmente, se utilizó la prueba de Chi-cuadrado para el análisis de datos. Luego, se realizó un análisis multivariado utilizando regresión múltiple de Poisson para ajustar las razones de prevalencia.Resultados:Participaron 4.582 ancianos brasileños, de los cuales el 27,1% no utilizó la prótesis total inferior. La falta de uso de la prótesis se asoció con ancianos (p=0,001), sin educación (p=0,001), sin seguro médico (p=0,019), con tabaquismo (p=0,012) y con los que no realizaban tratamiento oral. higiene todos los días (p<0,001). La no utilización de la dentadura inferior repercutió en una peor salud bucal autopercibida (p=0,001) y mayores dificultades para comer (p<0,001).Conclusiones:La no utilización de una dentadura inferior se asocia con peores condiciones socioeconómicas y un peor estilo de vida, fuertemente ligado al tabaquismo. Además, la no utilización de la prótesis tiene un impacto negativo en la autopercepción de la salud bucal y la alimentación (AU).

Masticatory Function and Nutritional Status in Brazilian Institutionalized Elders: Influence of Denture Use

ABSTRACT Objective: To evaluate the influence of tooth loss and the use of removable dentures on chewing function and nutritional status of institutionalized elders. Material and Methods: Cross-sectional study with 155 elders from seven long-stay institutions in João Pessoa, Brazil. The participants were classified according to the presence of reminiscent teeth and use of dentures in four levels: toothless, without denture (1); toothless with a complete denture (2); partial toothless without denture (3) and partial toothless with a partial denture (4). Nutritional status was assessed using the Mini-Nutritional Assessment (MNA) instrument and the Body Mass Index (BMI). Swallowing threshold was used for the assessment of masticatory function, using a portion of roasted peanuts (3.7 g). Comparisons among groups were performed using Kruskal-Wallis test with Bonferroni adjustment, considering p<0.05. Results: MNA (p=0.702) and BMI (p=0.884) were not modified in relation to the presence of teeth and denture use. Toothless individuals without dentures had a lower swallowing threshold (p<0.001), whilst partial toothless with dentures had better masticatory function (p>0.05). Conclusion: The presence of reminiscent teeth and the use of dentures do not influence the nutritional status of the elders but interfere with the masticatory function. Prosthetic rehabilitation is desirable for complete toothless individuals.

Avaliação de soluções antifúngicas de guanidina para resina base de dentadura: um estudo in vitro / Evaluation of guanidine antifungal solutions for denture base resin: an in vitro study

Background: The purposes of this study were: (1) to formulate polyhexamethylene guanidine hydrochloride (PHMGH) solutions at different concentrations; (2) to evaluate their antifungal activity against a mature biofilm of Candida albicans on acrylic resins; (3) to evaluate possible effects on acrylic resins flexural strength and surface roughness. Methods: PHMGH solutions were formulated with distilled water and 0.125, 0.250, or 0.5 wt.% of PHMGH. One group without PHMGH was used as control. For antifungal activity analysis, acrylic resin specimens were contaminated with C. albicans. Specimens were immersed in PHMGH solutions or distilled water for 5 or 10 min. Ultimate flexural strength and surface roughness of acrylic resins were evaluated. Results: All PHMGH solutions at 5 or 10 min showed antifungal activity compared to the control group (p<0.05). The group with 0.5 wt.% of PHMGH showed no countable colonies regardless of the time of contact with the acrylic resins. After 10 min, all PHMGH solutions had antifungal effect without differences from 0.125 to 0.5 wt.% of PHMGH. All groups showed high flexural strength after contact with the solutions compatible with ISO 20795-1:2013 recommendation. The values of surface roughness always remained low, from 0.01 to 0.04 µm for all groups. Conclusion: Within the limitations of this study, it was concluded that the use of a solution composed by distilled water and 0.5 wt.% of PHMGH for 5 min was effective as a disinfectant agent against mature biofilm of C. albicans , maintaining acceptable roughness and flexural strength.

Antecedentes: Os objetivos deste estudo foram: (1) formular soluções de cloridrato de polihexametileno guanidina (PHM-GH) em diferentes concentrações; (2) avaliar sua atividade antifúngica contra biofilme maduro de Candida albicans em resinas acrílicas; (3) avaliar efeitos na resistência à flexão e rugosidade da superfície. Métodos: Soluções de PHMGH foram formuladas com água destilada e 0,125, 0,250 ou 0,5% em peso de PHMGH. Um grupo sem PHMGH foi usado como controle. Para análise da atividade antifúngica, amostras de resina acrílica foram contaminadas com C. albicans, e imersas em soluções de PHMGH ou água destilada por 5 ou 10 min. Resistência à flexão final e rugosidade da superfície foram avaliadas. Resultados: Todas as soluções de PHMGH aos 5 ou 10 minutos apresentaram atividade antifúngica em comparação ao grupo controle (p <0,05). O grupo com 0,5% em peso de PHMGH não mostrou colônias contáveis, independentemente do tempo. Após 10 minutos, todas as soluções de PHMGH tiveram efeito antifúngico sem diferenças de 0,125 a 0,5% em peso de PHM-GH. Os grupos apresentaram alta resistência à flexão após o contato com as soluções compatíveis com a recomendação ISO 20795-1: 2013. Os valores de rugosidade da superfície permaneceram baixos, de 0,01 a 0,04 µm para todos os grupos. Conclusão: Dentro das limitações deste estudo, concluiu-se que o uso de uma solução composta por água destilada e 0,5% em massa de PHMGH por 5 min foi eficaz como agente desinfetante contra o biofilme maduro de C. albicans, mantendo rugosidade e resistência à flexão aceitáveis.

Reproduction of Esthetic Individuality in Upper Immediate Complete Denture / Reproducción de la Individualidad Estética en Prótesis Completa Inmediata Superior

ABSTRACT: Prosthodontics, in general, aims to rehabilitate the masticatory function of the patient, as well as the stomatognathic system, maintaining his or her individual facial characteristics. The immediate removable complete denture is placed immediately after extraction of the natural teeth and allows adaptation of the patient from the dentate state to the denture, until the definitive denture is placed. When an immediate complete denture is fabricated, esthetics plays a fundamental role and thus the assembly of artificial teeth can be performed maintaining the same position, alignment and arrangement of the remaining anterior teeth, providing a natural and esthetic appearance to the denture, thus the transition from the dentate to the edentulous state is less noticeable. This paper reports the case of a patient who needed oral rehabilitation with an immediate upper complete denture and presented favorable smile esthetics of the anterior teeth, which allowed the preservation of alignment, position and arrangement of natural teeth during the assembly of artificial teeth, maintaining and preserving the esthetic individuality and facial harmonization, meeting the patient's desire and expectations.

RESUMEN: La prostodoncia, en general, tiene como objetivo rehabilitar la función masticatoria del paciente, así como el sistema estomatognático, manteniendo sus características faciales individuales. La dentadura postiza completa removible se coloca inmediatamente después de la extracción de los dientes naturales y permite la adaptación del paciente del estado dentado a la dentadura, hasta que se coloque la dentadura definitiva. Cuando se fabrica una dentadura postiza completa inmediata, la estética juega un papel fundamental y, por lo tanto, el ensamblaje de dientes artificiales se puede realizar manteniendo la misma posición, alineación y disposición de los dientes anteriores restantes, proporcionando un aspecto natural y estético a la dentadura, por lo tanto, la transición desde el estado dentado hasta el estado desdentado es menos notable. Este artículo informa el caso de una paciente que necesitó rehabilitación oral con una dentadura postiza completa superior inmediata y presentó una estética de sonrisa favorable de los dientes anteriores, lo que permitió preservar la alineación, la posición y la disposición de los dientes naturales durante el ensamblaje de los dientes artificiales, manteniendo y preservando la individualidad estética y la armonización facial, satisfaciendo los deseos y expectativas del paciente.

Evaluation of bite force and masticatory performance: complete denture vs mandibular overdenture users

Abstract: This cross-sectional observational study with 24 patients evaluated differences in bite force (BF) and masticatory performance (MP) between conventional complete denture (CCD) and implant mandibular overdenture (IMO) users and the correlation between these variables. The BF test was performed bilaterally with an occlusal force device. During the MP test, patients were asked to chew Optocal particles for 40 cycles. The Shapiro Wilk test was employed to verify the normality of the data, the student t test to identify differences between groups, and Pearson's correlation to investigate interrelationships between variables. A multiple linear regression was subsequently performed via the stepwise method. P values ≤0.05 were considered statistically significant. Unlike IMO users, CCD users presented a significant difference (25.6%) in BF between the dominant and non-dominant chewing side (p=0.04). IMO users presented significantly higher BF (p=0.01) without presenting a dominant side (p=0.38), and also performed significantly better for the following MP parameters: MPX50 values decreased by 27.25% in IMO users (p=0.01), MPB decreased by 48.38% (p=0.01), and ME 5.6 decreased by 53.25% (p=0.02), while ME2.8 increased by 151.57% (p=0.01). The BF and MPX50 in the IMO wearers group were negatively correlated (-0.57; p=0.05); this correlation coefficient was the only parameter included in the multivariate regression model. IMO users have higher BF and better masticatory performance than CCD users, especially in terms of chewed particles size reduction. MP is correlated with a higher BF in IMO users through better particle trituration.

Resumo Este estudo observacional transversal com 24 participantes teve como objetivo avaliar as diferenças na força de mordida (FM) e na PM (performance mastigatória) entre usuários de prótese total convencional (PTC) e de overdenture mandibular (OM) e a correlação entre essas variáveis. O teste de FM foi realizado bilateralmente com um dispositivo de força oclusal. Durante o teste de PM, os pacientes foram solicitados a mastigar uma porção padronizada de Optocal por 40 ciclos mastigatórios. O teste de Shapiro Wilk foi empregado para verificar a normalidade dos dados, o teste T de Student para identificar diferenças entre os grupos e os coeficientes de correlação de Pearson para investigar inter-relações entre variáveis. Uma regressão linear múltipla foi realizada pelo método stepwise. Valores de p≤0,05 foram considerados estatisticamente significantes. Diferentemente dos usuários de OM, os usuários de PTC apresentaram uma diferença significativa (34%) na FM entre o lado dominante e o não dominante (p=0,04). Os usuários de OM apresentaram FM significativamente maior (p=0,01) sem apresentar um lado dominante (p=0,38) e obtiveram PM significativamente melhor nos seguintes parâmetros: os valores de PMX50 diminuíram 27,25% (p=0,01), PMB diminuiu em 48,38% (p=0,01), e EM 5.6 diminuiu 53,25% (p=0,02), enquanto EM2.8 aumentou 151,57% (p=0,01). A FM e PMX50 no grupo de usuários da IMO foram negativamente correlacionados (-0,57;p=0,05); esse coeficiente de correlação foi o único parâmetro incluído no modelo de regressão multivariada. Os usuários da OM possuem maior FM e melhor performance mastigatória do que os usuários de PTC, observados principalmente na redução do tamanho das partículas mastigadas. A PM está correlacionada com um maior FM nos usuários da OM através de uma melhor trituração de partículas.

Denture Adhesives - Knowledge and Tradition among Denture Wearers in Western Maharashtrian Population - A Survey.

Denture adhesives play a vital role in retention of complete dentures, wherever indicated. Dentists need to know about denture adhesives to be able to identify those patients who actually need them and to be able to educate them about the advantages, disadvantages and correct use of these products. The aim of the study was to evaluate the knowledge about denture adhesives among complete denture wearers indicated for use of denture adhesives visiting Dental Colleges in Western Maharashtra. METHODSThe study was conducted on 300 completely edentulous patients with conventional complete dentures indicated for use of denture adhesives. RESULTSPatients (n= 300) who were wearing ill - fitting complete dentures and required use of denture adhesives were selected, their response about knowledge was assessed by questionnaire survey and those who knew about it were instructed to demonstrate the application of denture adhesive to the intaglio surface of complete denture. 34.7% (n1= 104) of the total subjects (n= 300) had heard about denture adhesives. Out of these 104 subjects, 69.2% (n1= 72; CP= 24%) had used and 77.8% (n1= 81; CP= 27%) knew when to use denture adhesives. Out of 72 subjects who had used denture adhesive, only 30.5% (CP= 7.3%) could demonstrate the adequate technique to use denture adhesive. CONCLUSIONSKnowledge about use of denture adhesives for those who are in need per se has to be spread along with right technique of its use. The indication of its use, and correct technique/techniques of application, should be taught to the patients who demand the use of denture adhesives.